Cypress CA-USBHUT 운영 매뉴얼 - 페이지 7

{카테고리_이름} Cypress CA-USBHUT에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress CA-USBHUT 11 페이지. Multi-functioning hdmi/usb/rs- 232 & ir over single cat5e/6 transmitter and receiver extender box
Cypress CA-USBHUT에 대해서도 마찬가지입니다: 운영 매뉴얼 (16 페이지)

페이지 인쇄

7. Operation Controls and Functions

7.1 Transmitter's Front Panel

POWER

① ②

① Power LED: The red LED will illuminate when the device is connected with

power.

② Link LED: The LED red will illuminate when the device has received input

source single and output display ' s data.

③ LINK PAIR SELECT: This dip switch allows user with matrix setting for link up

to 16 pairs of the devices with single IP router. Each pair must have

the same dip switch setting in order to pair to the right device setting. The

factory default setting is at 0000.

7.2 Transmitter's Rear Panel

DC 5V

USB IN

①

① DC 5V: Plug the 5V DC power supply into the unit and connect the

adaptor to AC wall outlet. Power LED will illuminate when the power is on.

② USB IN: This slot is to connect with PC/Notebook for input source signal

with connection cable.

③ CAT5e/6 OUT: This slot is to connect with CAT5e/6 cable with receiver

side ' s CAT5e/6 input.

④ HDMI IN: This slot is to connect with input source such as DVD or Blue-Ray

player with connection cable.

⑤ RS 232 IN: This slot is to connect with D-Sub 9pin from PC ' s system for

controlling both the input source and output display over RS-232.

⑥ IR BLASTER: This slot is to connect with IR blaster cable included in the

package for IR signal sending and controlling the HDMI input source

equipment.

LINK

CAT5e/6 OUT

②

③

LINK PAIR

SELECT

HDMI/USB/IR/RS232 to CAT5e/6 Transmitter

③

HDMI IN

④

RS 232 IN

BLASTER

⑤

⑥