Cypress CMDP-13MDPI 운영 매뉴얼 - 페이지 7

{카테고리_이름} Cypress CMDP-13MDPI에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress CMDP-13MDPI 12 페이지. 1by 3 mini displayport extender splitter

7. Operation Controls and Functions

MDP OUT 1~3: Connect these slots with the output displays Mini

①

DisplayPort input port in order to send a signal.

Note: It is suggested to use the same type/model of display in order to

get optimal image quality. When the input source ' s timing

is matched with the output display ' s timing, the device will

first extend the image according to the specifications of the

connected output display. If the input sources timing does not

match the output display ' s timing the device will then split the

signal to match the number of the connected display to show an

identical image. (Detail information please refer to section 8. Timing

table for monitors).

On/off switch: Push this switch to turn the device on or off. The green LED

①

will turn on when the device is switched on.

DC 3.3V: This slot is where you plug the 3.3V DC power supply into the

②

unit and connect the adaptor to an AC outlet.

MDP IN: This slot is where you connect the input source equipment such

③

as a PC or any output device that has a Mini DisplayPort.

MDP

OUT 3

OUT 2

DC 3.3V

POWER

OFF

MDP

OUT 1

MDP IN