ASHOK LEYLAND CG 1613 H 일반 유지 관리 지침 - 페이지 2

{카테고리_이름} ASHOK LEYLAND CG 1613 H에 대한 일반 유지 관리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. ASHOK LEYLAND CG 1613 H 10 페이지. Water truck 9 kl capacity

Maintenance Instruction

To get maximum service life from your vehicle, always make a habit to carry out simple check,

periodic check, general check and maintenance of vehicles. These checks and inspections are carried out

time to time will ensure minimum operating cost and maximum uptime of your vehicles:-

Check engine oil level top up if necessary.

Check coolent level top up if necessary.

Drain condensate from air tanks.

Check the vacuum indicator provide on the instrument panel for the appearance of red band.

Check water separator for collected water and drain if necessary. If water separator is not drained

periodically, fuel contaminates with water enter the FIP and injectors effecting performance and

damaging the fuel system.

Check tyre wear and pressure, if necessary inflate to the specified pressure

Check brakes

Check all light, warning indicators and wind screen wipers are in functioning condition.

Check oil level of steering gear box.

Check the battery electrolyte level, if necessary top up using distilled water at rest and cold.

Check the exhaust system visually, if exhaust is excessively smoky or engine is noisy refer vehicle

to nearest workshop for necessary check up.

Periodically check and ensure that the radiator cowl is intact, and replace a defective thermostat or

a missing header tank filler cap immediately as other wise the efficiency of cooling system would

be affected and this will be damage the engine.

Check all gauges fitted on instrument pannel are proper functioning.

Check all lights and electric connections, if found loose light it properly.

Fill up diesel tank at the end of each working day to reduce water condensation in the tanks.

Disconnect the propeller shaft while towing the vehicle for the long distance.

Drain air tank once in a week to drain water and oil sediments from the system.

Disconnect alternator/battery electric connection while carrying out welding work on the vehicle.

Appx 'A'