Cypress Semiconductor CY25819 사양 시트 - 페이지 6
{카테고리_이름} Cypress Semiconductor CY25819에 대한 사양 시트을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress Semiconductor CY25819 7 페이지. Cypress spread spectrum clock generator specification sheet
페이지 인쇄Ordering Information
Part Number
CY25818SC
CY25818SCT
CY25819SC
CY25819SCT
Lead-free
CY25818SXC
CY25818SXCT
CY25819SXC
CY25819SXCT
Package Drawing and Dimensions
8 Lead (150 Mil) SOIC - S08
4
5
0.189[4.800]
0.196[4.978]
0.050[1.270]
BSC
All product and company names mentioned in this document may be the trademarks of their respective holders.
Document #: 38-07362 Rev. *B
© Cypress Semiconductor Corporation, 2006. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use
of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be
used for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its
products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress
products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
Package Type
8-pin SOIC
8-pin SOIC–Tape and Reel
8-pin SOIC
8-pin SOIC–Tape and Reel
8-pin SOIC
8-pin SOIC–Tape and Reel
8-pin SOIC
8-pin SOIC–Tape and Reel
8-lead (150-Mil) SOIC S8
PIN 1 ID
1
0.150[3.810]
0.157[3.987]
0.230[5.842]
0.244[6.197]
8
0.061[1.549]
0.068[1.727]
0.004[0.102]
0.004[0.102]
0.0098[0.249]
0.0138[0.350]
0.0192[0.487]
Commercial, 0° to 70°C
Commercial, 0° to 70°C
Commercial, 0° to 70°C
Commercial, 0° to 70°C
Commercial, 0° to 70°C
Commercial, 0° to 70°C
Commercial, 0° to 70°C
Commercial, 0° to 70°C
1. DIMENSIONS IN INCHES[MM] MIN.
2. PIN 1 ID IS OPTIONAL,
ROUND ON SINGLE LEADFRAME
RECTANGULAR ON MATRIX LEADFRAME
3. REFERENCE JEDEC MS-012
4. PACKAGE WEIGHT 0.07gms
PART #
S08.15 STANDARD PKG.
SZ08.15 LEAD FREE PKG.
SEATING PLANE
0°~8°
0.016[0.406]
0.035[0.889]
CY25818/19
Product Flow
MAX.
0.010[0.254]
X 45°
0.016[0.406]
0.0075[0.190]
0.0098[0.249]
51-85066-*C
Page 6 of 7
[+] Feedback