Dolphin BC633 설치 및 유지 관리 매뉴얼 - 페이지 11

{카테고리_이름} Dolphin BC633에 대한 설치 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dolphin BC633 19 페이지. Electrnic soap dispenser

SETTINGS ADJUSTMENTS

WITH REMOTE CONTROL

If desired, use the remote control to adjust the soap dispenser settings. Hold the

remote control straight in front of the sensor in a distance of about 10-15cm.

Attention: Holding the soap dispenser remote control out of the recommended

range (too close or too far) may interfere with the remote's activation.

Choose the function you want to adjust by pressing on the function button as

follows:

1 SOAP QUANTITY

The 1-4 drop keys allow the user to choose the

desired soap quantity.

1: 0.2 to 0.4 2: 0.7 to 0.9 3: 1.2 to 1.6 4: 2.1 to 2.3

Indication: continues blink of the red light in the

sensor eye.

* The exact soap dosage depends on the soap viscosity.

2 ADJ

This function allows coming back to soap quantity factory settings. Press the ADJ

button. Indication: 2 blinks of the red light in the sensor eye.

3 TEMPORARY OFF FUNCTION

This function is ideal to perform any kind of activity in front of the sensor without

operating the system (for example, cleaning). The soap dispenser will remain shut

for 1 minute when this button is pressed once. To cancel this function and to return

to normal operation press the On/Off button again or wait 1 minute.

Indication: OFF – 2 fast blinks, ON – 4 fast blinks

4 REFILL THE SOAP TANK

Once the soap tank has been refiled, press the FILL button. The pump would work

for one minute in order for the soap to start coming out of the soap dispenser

spout. To stop this activity press the FILL button again.

BC633 Series

Dolphin Blue