Dolphin BC633F 설치 및 유지 관리 매뉴얼 - 페이지 4

{카테고리_이름} Dolphin BC633F에 대한 설치 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dolphin BC633F 18 페이지. Electronic foam soap dispenser

PRE INSTALLATION INFORMATION

Check contents

Separate all parts from the packaging and check each part with the "Pack contents"

section.

Make sure all parts are accounted for before discarding any packaging material.

If any parts are missing, do not attempt to install your touch free soap dispenser

until you obtain the missing parts.

Warnings

Do not install your electronic soap dispenser facing a mirror or any electronic system

operated by an infrared sensor.

To prevent reflection problems, it is recommended to keep a minimum distance of 5'

(1.5m) between the soap dispenser sensor and any other directly facing objects and

a minimum of 6" (150 mm) between the soap dispenser and the adjacent tap.

IMPORTANT: Keep in mind that when using the tap installed next to the soap

dispenser, the user hands should not interfere with the soap dispenser sensor

detection area.

Correct Installation

Incorrect installation

DO NOT AIM SOAP SENSOR

AT WATER STREAM

Dolphin

BC 633F