Dolphin Dolphin Blue BCL632F 설치 및 유지 관리 매뉴얼 - 페이지 13
{카테고리_이름} Dolphin Dolphin Blue BCL632F에 대한 설치 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dolphin Dolphin Blue BCL632F 19 페이지. Panel mounted foam soap dispenser
Dolphin Dolphin Blue BCL632F에 대해서도 마찬가지입니다: 설치 및 유지 관리 매뉴얼 (17 페이지)
![Dolphin Dolphin Blue BCL632F 설치 및 유지 관리 매뉴얼](/uploads/products/server2/978179/978179.jpg)
MAINTENANCE
C A R E A N D C L E A N I N G O F C H R O M E A N D S P E C I A L
F I N I S H E S
DO NOT use steel wool or cleansing agents containing alcohol, acid, abrasives, or
their like. Use of any prohibited cleaning or maintenance products or substances
could damage the surface of the soap dispenser. For surface cleaning use ONLY
soap and
water, then wipe dry with a clean cloth or towel. When cleaning bathroom tiles, the
soap dispenser should be protected from any splattering of harsh cleansers.
D I S A S S E M B L E O F T H E S O A P P I P E F R O M T H E P U M P
The soap pipe can be disconnected from the soap pump by a simple slide and pull
action. The sliding ring of the quick connection fixation nipple on the pump should
be pulled down. It releases the open end of the soap pipe which can then be easily
pulled out.
F I LT E R C L E A N I N G I N S T R U C T I O N S
( F O A M D I S P E N S E R O N LY )
› This soap dispenser is provided with a foam filter. It is recommended to clean the
filter every six (6) months.
› If the soap supply has decreased, this may be caused by the clogged filter. The
filter can be cleaned as follows:
1. Use a wrench to unscrew the quick connection fitting from the foam
compressor and pull out the filter housing.
2. Remove the filter from the housing.
3. Replace the filter (recommended) or wash it under running water for a
temporary fix.
4. Reassemble the parts.
1
|
Dolphin Blue
|
BC632F