Dolphin DOL1000-MF 사용자 설명서 - 페이지 7

{카테고리_이름} Dolphin DOL1000-MF에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dolphin DOL1000-MF 8 페이지.

Advanced Features

Add Guest Code

1 2 3 4

The Guest Code is a one-time use access code. Once used, the number will

be cleared from memory.

Add Access Toggle Code

1 2 3 4

NOTE:

TOGGLE MODE ONLY FOR USE WHEN KEYPAD IS HARD WIRED.

Entering Access Toggle Code will toggle the keypad to continuously activate.

Entering the code again will toggle the keypad off. Dip switch #6 on the circuit

board needs to be in the off position in order for this mode to work.

Resetting the Keypad and Master Code

Locate the red

1. Remove the battery or eliminate the power source to the

keypad. Wait 30 seconds for the keypad to completely power off.

2. Press and hold the

3. While holding the Button, reconnect the battery or power

source to the keypad.

4. Continue to hold to

This indicates that the Master Code has been reset to 1234.

IP Rating: IP64

Temperature Rating: -40C to 70C / -40F to 158F

Size: 7 1/2in. x 7 3/4in. x 3 5/8in. • Weight: 1 ¾ lbs.

Housing: ABS • Face Plate Material: ABS

Operating Voltage: 6-24 AC/DC

Output relays: 1A

3 #

4 #

Master Reset Button

Master Reset

Button

Access Code

Toggle Code

on the circuit board.

Button.

until the keypad beeps 3 times.

Channel