3M Versaflo TR-300 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} 3M Versaflo TR-300에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3M Versaflo TR-300 2 페이지. Powered air purifying respirator (papr) assemblies
3M Versaflo TR-300에 대해서도 마찬가지입니다: 사용자 지침 (16 페이지), 기술 게시판 (8 페이지), 문제 해결 매뉴얼 (4 페이지)

페이지 인쇄

These respirators help protect against certain airborne contaminants. Use of 3M™ Powered and Supplied Air

Respirators by untrained or unqualified persons, or use not in accordance with the instructions, may adversely affect

product performance and result in sickness or death. Powered and supplied air respirators are to be used only by

qualified persons who are properly trained in their use and maintenance and only in accordance with their operating and

maintenance manuals. Each person using these products must first read and understand the operator's manual. See

supervisor for assistance or call 3M OH&ESD Technical Service in U.S.A. at 1-800-243-4630. In Canada call 1-800-

267-4414.

The following are excerpts from the TR-300 User Instructions. Before using read and understand all User Instructions.

NOTE: All user interfaces (e.g. latches, connection points) are colored blue for quick identification.

Push button to confirm

battery charge – 5 bars = 80-100%.

Confirm HE filter visible in window

Turn on PAPR – push blue button.

Confirm green ON light on (1).

Confirm alarm lights off (2,3).

Inspect hood for tears, holes. Insert

breathing tube into hood connection.

3M Occupational Health and Environmental Safety Division

3M Center, Building 235-2W-70

St. Paul, MN 55144-1000

WARNING

Confirm battery pack secure-

tug battery pack to confirm.

Confirm airflow is sufficient. Bottom of ball

above line.

Insert breathing tube into PAPR air outlet.

Don PAPR per workplace procedures.

TR-300 Quick Start

Page 2 of 2

Guide