Dolphin PXH822 매뉴얼 - 페이지 6

{카테고리_이름} Dolphin PXH822에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dolphin PXH822 18 페이지. Pci express adapter

Packaging

The PXH822 includes the following components.

•

PXH822 Adapter Board.

•

Face plate for SFF-8644 connector.

•

6 screws for fixing the XMC and face plate.

•

Anti-static bag.

Certain steps should be taken prior to installing the PXH822. You should determine the following configuration requirements.

•

Which XMC slot and system will the card be installed in?

•

What is the speed and link width of the XMC carrier that the card will be installed in?

•

Will the card be used as Transparent host or Transparent target operation ?

•

What is the operating environment for the Host computer?

•

What type and length of cables will be used?

•

How to ensure proper operational conditions, temperature and air-flow.

The PXH822 supports PCIe Gen1, Gen2 and Gen3 speeds and x1, x2, x4, x8 using XMC connector P15 and x16 link-widths using XMC

connector P15+P16. The slot width and speed will affect the performance of the card. The card will auto configure to the slot

speed and width.

The PXH822 can act as either a host adapter or target adapter. The PXH822 has a DIP switch bank to control these functions. The

DIP switch labeled SW1 can be found close to the upper edge of the board. The main configuration options are host or target

operations . The default DIP switch setting is transparent host x16 operations. Additional settings are target operations, two x8

links, four x4 links or long cable tuning.

To maximize lifetime for the product and maintain the warranty, please honor the specified operating temperature and make sure

the specified air flow is present:

Operating Temperature: 0°C - 55°C (32°F - 131°F), Air Flow: 150 LFM

Operating Temperature with AOC: 0°C - 45°C (32°F - 113°F), Air Flow: 150 LFM

PXH822 User's Guide – Dolphin Interconnect Solutions

Page 6