ASI 0391-1A 설치 및 유지 관리 매뉴얼 - 페이지 4
{카테고리_이름} ASI 0391-1A에 대한 설치 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ASI 0391-1A 16 페이지. Soap dispenser and remote control
페이지 인쇄
PRE-INSTALLATION INFORMATION
CHECK CONTENTS
Separate all parts from the packaging and check each part with the
PACK CONTENTS section.
Make sure all parts are received and separated before discarding any
packaging material.
If any parts are missing, do not attempt to install the system until you
obtain the missing parts.
IMPORTANT
Ensure there is adequate space and clearance under the vanity to
accommodate the SD Mounting Shank and Basin Nut in the desired
location before drilling the hole in the counter top.
Ensure there is adequate space to place the Pump, and Bottle Support
Bracket within reach of the Com Cable from the SD Shank.
Keep in mind that the location of the user hands, while using the faucet
nearby, should not interfere with the soap dispenser sensor detection
area.
CAUTION
Do not install the soap dispensers facing a mirror or any other electronic
system operated by an infrared sensor.
To prevent reflection problems, it is recommended to keep a minimum
distance of 5' (1.5M) between the soap dispenser sensor and any other
directly facing objects.
3
1408201627 Rev G
05 August 2015