ASI 0391-6-1AC 설치 및 유지 관리 매뉴얼 - 페이지 7
{카테고리_이름} ASI 0391-6-1AC에 대한 설치 및 유지 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ASI 0391-6-1AC 16 페이지. Soap dispenser and remote control
페이지 인쇄
INSTALLATION
STEP 1 - INSTALLING THE EZFILL™ SOAP DISPENSING SYSTEM SOAP DISPENSER
Drill a hole in the counter top at
the designated location.
Remove and retain the basin nut
and the gasket from the base of
1
the soap dispenser body, sliding
completely over and off the soap
tube, Com and Power Cables.
Place the soap dispenser shank
through the escutcheon flange
(with O-ring down) into the hole in
the counter top.
2
Slide the gasket, disk and nut
over the black soap tube and both
cables and thread onto the shank
and secure it to deck underside.
Black Nylon 1/4" dia. (Ø6) tube 36"
(914) long is supplied permanently
attached to dispenser head.
Assemble the tube to the connector
3
on pump by pushing it on (provided
on end of black tube).
Insert the Com Plug into the Com
Socket (See Step 6).
Fix the pump to the desired
location by securing the support
with the supplied screws.
4
For ease of installation preference,
optionally swap steps 3 and 4 while
ensuring pump is within reach
range of Com cable.
1408201627 Rev G
MAX 1-3/16"
( Ø 30)
MIN 1-1/32"
( Ø 26)
1-1/8" Dia (Ø28)Recommended hole size
36" (914)
tube length
6
05 August 2015