ASI Velare 0663-T 설치 매뉴얼 - 페이지 2

{카테고리_이름} ASI Velare 0663-T에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ASI Velare 0663-T 3 페이지. Btm system cabinet

VELARE™ BTM SYSTEM CABINET INSTALLATION GUIDE (PAGE 2 OF 3)

INSTALLATION OF EL-LIGHTING

Connect the two (2) output connector plugs of the 12V AC/DC Adapter with 2 Outputs (provided) into the two

(2) DC Power switches' sockets (provided) located at the top of the cabinet.

Connect the 12V AC/DC Adapter (provided) to the Quad Outlet (by others).

Turn ON the two (2) DC switches (provided).

INSTALLATION OF FOAM SOAP DISPENSER

Foam Soap Dispenser includes power supply adapter (provided, item 1) to be connected into one of the quad

outlets (by others).

Soap Tank can be filled by removing the soap tank from soap tank holder bracket and unscrewing the cap.

Fill the tank with foaming soaps with a pH in range 7±1.5 and viscosity in range 1 ~ 100 cP (mPa•s).

Close the cap after filling and place the soap tank back to the soap tank holder bracket. Make sure the soap tube

reaches to approximately 1/4" [6] above the bottom of the soap tank through the guide sleeve and it is not bent or

curved.

Refer to OM provided with specific soap dispenser for maintenance instructions.

PAPER TOWEL DISPENSER

Paper towels can be loaded in place. For Z-Fold or Multi-Fold towels use the adapter MFTA-2 (provided).

For C-Fold towels do not use the MFTA-2 adapter and store it inside the cabinet for use at a later time when

towel style may change.

AMERICAN SPECIALTIES, INC.

441 Saw Mill River Road, Yonkers, NY 10701

(914) 476.9000 • (914) 476.0688

www.americanspecialties.com

FIG. 3

THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE

MODEL №:

ISSUED:

REVISED:

FIG. 4

0663-T

29 JAN 2019

13 MAR 2019