ACR Electronics MINI B300 ILS - REV B 제품 지원 매뉴얼 - 페이지 8
{카테고리_이름} ACR Electronics MINI B300 ILS - REV B에 대한 제품 지원 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACR Electronics MINI B300 ILS - REV B 9 페이지. Class b emergency position indicating radio beacon
ACR Electronics MINI B300 ILS - REV B에 대해서도 마찬가지입니다: 제품 지원 매뉴얼 (13 페이지)
페이지 인쇄
4.2
Battery Check
1. The battery expiry date should always be placed on the battery and the outside of the
Beacon case. See 2.2 Battery Installation. Replace the battery immediately after extended
use or emergency and always on or before the battery expiry date. Use only a 6 volt Lithium
Duracell DL223A (or equivalent) battery.
2. Safety Precautions:
Warning: To avoid possible fire, explosion, leakage or burn hazard, do not open, recharge,
disassemble, heat above 71°C (160°F) or incinerate.
4.3
Inspection Check
The following checks should be made during the periodic servicing:
1. Check the antenna tip and telescoping sections for any signs of damage or corrosion.
2. Check the plastic covered portion of the antenna for any signs of chafing, wear, cracks, or
other damage, and signs of resultant corrosion beneath the covering.
3. Check the antenna socket at the cap surface for any sign of looseness or corrosion.
4. Check the Beacon housing for signs of damage or mishandling. Dents, or damage to the top
end could result in an operational malfunction during an emergency.
5. Check the lanyards for chafing, fraying or any damage. Check the lanyard anchor points for
chafing. Resecure the lanyards and check the knots for tightness.
6. Rinse the outside of the unit with fresh water frequently to remove any salt build-up on case
or exposed parts.
7
Y1-03-0136 Rev. C