Cypress Semiconductor CYALKIT-E03 키트 매뉴얼 - 페이지 11
{카테고리_이름} Cypress Semiconductor CYALKIT-E03에 대한 키트 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cypress Semiconductor CYALKIT-E03 19 페이지. Solar-powered bluetooth low energy sensor beacon 5 pack
Cypress Semiconductor CYALKIT-E03에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄Select the Cypress BLE-Beacon (BLE-Beacon) app. On the subsequent screen, click the Install button to proceed with
2.
installation.
When presented with the app permission dialog, click Accept to continue.
3.
When the installation is complete, the BLE-Beacon app can be launched from the App Drawer.
4.
Place the Solar BLE Sensor under an office light. Refer to step 3 of
5.
Launch the BLE-Beacon app. A splash screen is displayed for a few seconds before the app displays the Device List
6.
screen. If Bluetooth is turned OFF in the Android device, Android OS will prompt you to turn ON Bluetooth.
The BLE-Beacon app performs device discovery by default when the app is opened. Select the mode as Graph to display the sensor
7.
data. You can recognize the five data (#2 to #6) on the graph screen.
Note: If evaluating this demo near same ID of other Kit, the Graph will show incorrect data. In this case, disable
transmitting BLE data of all other kits and then repeat this step.
Refer to
CYALKIT-E03 Solar-Powered BLE Sensor Beacon 5 Pack Kit Guide, Document Number. 002-12543 Rev. *B
Cypress BLE-Beacon Android App User Guide
2.1.1 Establishing BLE
for detailed information.
Enclosure
Connection.
11