Cyracom ClearLink Cordless 사용자 설명서 - 페이지 6

{카테고리_이름} Cyracom ClearLink Cordless에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cyracom ClearLink Cordless 17 페이지.

To ensure you have sufﬁ cient range with your ClearLink ® Cordless follow these steps:

1) Pick up the main handset and press TALK. Walk to all areas where you would like to use ClearLink ®

Cordless. Make sure that the dial tone is not breaking up. Alternatively, call another person and con-

duct the same test.

Mounting the Base Unit on a Wall (Optional)

ClearLink ® Cordless is wall mountable. Please use a standard wall mounting kit or request one from

your CyraCom account representative.

To mount your ClearLink ® Cordless follow these steps:

1) Drill two holes in the wall according to wall mounting kit.

2) Attach the base unit to the wall.

3) Lift up the clips in the middle of both handset cradles.

4) Place the handsets into the base unit.

NOTE: Make sure that the clips are in a upright position every time you place the handsets in the

cradle.

Accessing an Interpreter Using ClearLink

You can easily connect to a medical interpreter using ClearLink ® Cordless to have hands-free, mobile

communication with your Limited English Proﬁ cient patients. You can access the interpreter from either

the base unit or the cordless dual handsets.

To access an interpreter from the cordless dual handsets follow these steps:

1) Pick up the main handset and press TALK to get a dial tone.

2) Press the blue button labeled ACCESS.

3) When prompted, press the white button labeled ACCT/PIN.

4) Follow the voice prompts to connect to a medical interpreter.

5) When the interpreter comes on the line, pick up the second handset, press TALK.

7) Pass the second handset to the patient.

8) To disconnect from the call, press TALK on the main handset.

9) Return both handsets to the base to charge.

A speakerphone is located on both the base unit and handsets to enable hands-free communication or

multiple participants in the interpretation session. The handsets can also be taken into patient rooms

and put on speakerphone to be used at a patient's bedside to allow for hands-free communication.

To access an interpreter from the base unit follow these steps:

1) Press the button labeled SPEAKER to get a dial tone.

2) Press the blue button labeled ACCESS.

Cordless

ClearLink

™

Cordless User Guide