Cyron ABIG5-A6K URBAN5 사용자 설명서
{카테고리_이름} Cyron ABIG5-A6K URBAN5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cyron ABIG5-A6K URBAN5 4 페이지.
Cyron ABIG5-A6K URBAN5에 대해서도 마찬가지입니다: 사용자 설명서 (4 페이지)
페이지 인쇄ABIG7/5 LED HEADLIGHT USER MANUAL
Thank you for choosing CyronMotor products! We are committed to provide
the latest lighting technology without any compromises. Please read instructions
completely before starting installation.
TOOLS NEEDED
Consult your vehicle/motorcycle user manual for process of gaining access to headlight
housing and assembly. No special tools needed for Cyron headlights.
Look for the installation video of this product on CyronMotor.com
and Cyron YouTube channel.
INSTRUCTIONS
Cyron integrated ABIG series LED headlights replace vehicle's entire reflector assembly
which normally includes glass reflector, bulb, mounting rings, rubber boots, etc. Follow
vehicle user manual to gain access to the headlight reflector.
Install Cyron LED light in place of the glass reflector and secure the same method as the
vehicle's reflector was secured. Pay attention to the orientation of the light. It should only fit
in one position to provide secure mounting and correct light pattern.
Wire harness should be a simple plug-in for H4 sockets. For 7" lights two adapters are
provided which should be used as needed; an H13 and Harley 4-pin. H13 fits several
automotive applications. Harley adapter (Cyron# ABIGC2A) is mostly for HD motorcycles
with stock dual-bulb arrangement. (Exception is Roadking 2016+ which needs Cyron
ABIGC3A adapter) YOU WILL NOT BE USING EITHER ADAPTER IF YOUR BIKE/CAR
HAS H4 PLUG. In dual bulb arrangements follow the wire harness and find the black plug
placed inside the fairing. Unplug and replace with the adapter provided.
CAUTION: HOT SURFACES. DO NOT TOUCH THE
METAL SURFACES OF THE HEADLIGHT. THEY CAN BE
EXTREMELY HOT.
OPERATING IN HIGH-BEAM FOR EXTENDED PERIOD
OF TIME WHILE THE VEHICLE/BIKE IS STATIONARY
WILL CREATE EXCESSIVE HEAT AND WILL
ULTIMATELY CAUSE DAMAGE.
1