CyronMotor ABS1LHC 사용자 설명서 - 페이지 3

{카테고리_이름} CyronMotor ABS1LHC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CyronMotor ABS1LHC 8 페이지. Auxiliary light

65W halogen bulbs with a 25W LED, you can draw additional 40W . If unsure, draw power

directly from battery.

Controlling Option C – Fog Light: Connection to fog/passing lights. This option gives you

control to turn on/off the auxiliary lights with fog/passing lamp switch. Local laws vary on

usage of fog lights.

Power should be drawn straight from the battery if supply power to the lights is less than 4A

or not sure about the rating capacity. ABS1CRD Multifunction Cable (included with

ABS1LHC kit) facilitates such setup. See Figure 3. Alternatively a 12V relay can be used.

MODEL# ABS1H, ABS1LW

ABS1H and ABS1LW are supplied with power wires that can be connected directly to

12VDC following any of the controlling options A, B, or C. The source of power must be

capable of supplying 4A per light. Use an inline fuse if the source of power is not fused.

Two lights can be combined into one 10A inline fuse, or individually fused with 5A per light.

Figure 1