Cyrus 6a 사용자 지침 - 페이지 8

{카테고리_이름} Cyrus 6a에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Cyrus 6a 15 페이지. Pre xpd; pre xpd qx

페이지 인쇄

Cyrus Pre XPd, Cyrus Pre XPd Qx

CONFIGURATION

Through the setup menu you can customise your amplifier to best match your

system.

The setup sequence is activated by pressing the front panel set up button f.

Repeated pressing of the setup button will step down the list through each

available setup option until 'Storing settings' is shown on the display. When

each setup screen is displayed, changes may be made to the settings by

rotating the front panel rotary knob e. During the setup sequence, you can

move to the next or previous step by pressing the Input up or down buttons.

Note that the setup sequence will exit, saving any changed settings after 5

seconds of inactivity or after the last option 'Trim input 11' has been

completed.

The setup menu options are shown here –

Setup

Name Input 1

Choose a name for input 1 from the name list

Name Input 2

Choose a name for input 2 from the name list

Name Input 3

Choose a name for input 3 from the name list

Name Input 4

Choose a name for input 4 from the name list

Name Input 5

Choose a name for input 5 from the name list

Name Input 6

Choose a name for input 6 from the name list

Name Input 7

Choose a name for input 7 from the name list

Name Input 8

Choose a name for input 8 from the name list

Name Input 9

Choose a name for input 9 from the name list

Name Input 10

Choose a name for input 10 from the name list

Name Input 11

Choose a name for input 11 from the name list

Input 11 auto-hide

Display Mode

Select large input, small input or large volume

Trim Input 1

Set the sensitivity offset for input 1

Trim input 2

Set the sensitivity offset for input 2

Trim input 3

Set the sensitivity offset for input 3

Set the sensitivity offset for input 4

Trim input 4

Trim input 5

Set the sensitivity offset for input 5

Trim input 6

Set the sensitivity offset for input 6

Set the sensitivity offset for input 7

Trim input 7

Trim input 8

Set the sensitivity offset for input 8

Trim input 9

Set the sensitivity offset for input 9

Trim input 10

Set the sensitivity offset for input 10

Trim input 11

Set the sensitivity offset for input 11

The display will show 'Storing Settings', then exit setup.

Choose on or off (default is off)

Input names

When your amplifier left the factory, the input names are set as shown below

Input 1 – CD

Input 5 – Input 5

Input 2 – Tuner

Input 6 – Tape

Input 3 – Cyrus AV

Input 7 – Input 7

Input 4 – Input 4

Input 8 – Input 8

The name of any input may be changed to a choice from the following list.

Each name may be used once -

CD, DAB, Cyrus AV*, Phono, Tape 3-Head, Tape, Satellite, Cable, iPod,

MP3, DVD, Blu-ray, CD 1, CD 2, SACD, CD-R, Linkserver, Jukebox,

LaserDisc, Tuner, AV Direct*, TV, TV 1, AV, USB, Satellite 1, Cable 1, Video,

VCR, PVR, Cassette, DAT, MiniDisc, Games, Games 1, PC, Laptop, Mac,

Special, Keyboard, Aux, Stream X.

Before changing the names of the inputs, we recommend making a list of

each input number with your preferred name from the choices above before

setting the names. Each name may only be used once. When a name is

assigned to an input it will be removed from the list for other inputs.

NOTE:- There are two special function input names marked *.

'Cyrus AV' is reserved for the connection of Cyrus surround sound decoders

to one of the analogue Inputs 1-6 and should only be used for this purpose.

'AV Direct' is reserved for the connection of non-Cyrus surround decoders to

an analogue input. This input name must only be used for this purpose as the

volume level will lock to a very high setting (-6dB) when AV Direct is selected.

Choose 'No source' from the list to name inputs which have no source

connected to them. When named 'No Source', an input number will not

appear in the input selector scroll sequence or in the Zone 2 select sequence.

In addition, the name 'Tape 3-Head' will appear as an extra option in the

naming list for Input 6, and the name 'USB' will appear in the list for Input 11.

Input 11 auto-hide

The USB input has a special 'auto-hide' feature. If this feature is switched on,

the USB input will only appear in the input selector scroll sequence when a

valid source is connected to the USB input. If no source is connected or if the

source is switched off, Input 11 will not appear in the sequence.

Display mode

There are three modes of display operation.

The 'small input' setting will show a three line

display with the volume reading at the top of

the display, the selected input in the display

centre and the current sample rate/lock

status at the bottom when a digital input is

selected.

The 'large input' setting will show a two

line display with the volume reading at the

top and a larger input legend below.

The 'large volume' setting will display

large volume characters at the bottom of the

screen with the bargraph above.

Input sensitivity offset

It is possible to adjust the relative sensitivity

of individual inputs by selecting the

appropriate trim option from the menu. This

enables the volume level when playing low or

high output source components such as tape

decks or tuners to be equalized between

system sources.

Factory Settings

You can restore the configuration of your amplifier to the factory original

settings, changing the input names to those listed above, setting the display

mode to 'small input names' and setting all input sensitivity trim settings to

0dB.

To restore the settings, first disconnect the power cord from the amplifier.

Hold down the setup key on the front panel and re-connect the power cord.

User Instructions

Input 9 – Input 9

Input 10 – Input 10

Input 11 – Input 11

-27

Sample rate 44.1kHz

-27

-27dB

Offset

Input 7

+4dB