ASIS Technologies AMR171 사용자 설명서 - 페이지 5

{카테고리_이름} ASIS Technologies AMR171에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ASIS Technologies AMR171 8 페이지. Amr170 series nfc reader

1.5 Operation Guide

The AMR170 series reader must work with the ACU controller (it cannot operate by itself). The reader allows

user to access by Card only, Details of operation please refer to IBSS and/or ACU manual.

Keeping the card in parallel to the AMR17x reader a maximum read range can be obtained. The Reader will

still be able to read Card when the card is presented at an angle but this will result in the reducing of read

range.

Card and PIN operation (Model 175)

a) When the Green Led is blinking after presenting card, the means that PIN is request. Key in PIN and

follows by "#" key

b) Key in PIN + 1 for PIN DURESS (Example PIN is 1234, for duress activation, key pin 1235)

the maximum PIN is up to 6 digit. When the reader is powered-up, the LED and the Buzzer will respond.

Description

a) Upon Power Up the

Reader **N is setting on

the DIP switch.

b) Reader Ready

c) Reader Alarm & Event Message on LCD Display (AMR175 only)

Figure 4 Presenting Cards to Reader

Buzzer response

(AMR171/175)

The buzzer will beep

(N+1) time accord to the

DIP switch setting

Silent

LED Response

(AMR171/175)

Reader's Amber LEDs

Blink (N+1) times

Red LED always 'ON'

Green LED Short blink

at every 3 secs interval

Note that

LCD Display (For AMR175

only)

Model No Reader Address

Version

DD/MM/YY / 00:00:00

Ready