Cyrus CDXt 사용자 지침 - 페이지 4
{카테고리_이름} Cyrus CDXt에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Cyrus CDXt 7 페이지. Hi-fi products
페이지 인쇄Cyrus CDXt
Welcome to the world of Cyrus!
Congratulations on your choice of Cyrus Hi-fi products. Our state-of-the-art
design technology and outstanding quality of manufacture has won countless
awards around the world. We are confident that you will derive great pleasure
from owning a product from one of the most recognised and respected
manufacturers of hi-fi equipment.
Please read these instructions carefully before commencing installation. They
provide full guidance to help you install your Cyrus CDXt safely and correctly.
Preparations for Installation
Before installing the CDXt check that the following items are included in the
accessory box.
•
Warranty Card (back cover of this instruction manual)
•
AC Mains Cable
•
Remote Control Handset
•
2 x Phono leads for MC-BUS connection
After removing these items, please retain the packaging.
Install the CDXt in a well ventilated location away from sources of high
temperature, dust or humidity. Never stand the CDXt under another unit or on
any surface likely to hamper its cooling or ventilation.
INSTALLATION
(Refer to Fig.1
Key to the rear panel drawing:
1. Optical Output
2. Digital Output
3. MC-Bus System
Connecting an External D/A Converter
The CDXt provides a digital output to drive an external D/A converter. Using a
digital interconnect, connect the socket marked DIGITAL OPTICAL
b
DIGITAL COAXIAL
to the input of a suitable D/A converter and connect the
converter's audio outputs to a suitable input of the amplifier. Refer to the D/A
converter handbook for guidance.
The DIGITAL COAXIAL connection is recommended where this connection is
available.
Connecting a Cyrus PSX-R
The Cyrus PSX-R is a high quality regulated power supply, the use of which
will elevate your CDXt into a true world-class state-of-the-art product.
The connector fitted to the umbilical cable from the PSX-R must be securely
connected to the PSX-R socket
fitted, the connector will latch into the socket.
Note: The PSX-R power supply and the CDXt will both require connection to
the mains supply.
MC-Bus System Connection (Optional)
By using the MC-BUS connection on your CDXt, a highly functional integrated
system with full remote control may be set up. This feature is usable if you
own a Cyrus amplifier. Refer to the relevant product handbook for MC-BUS
wiring instructions.
2
)
4. PSX-R Connection
5. Power Inlet
d
on the rear of the CDXt. When correctly
OPERATION
(Refer to Fig.2)
Key to the front panel drawing:
6. CD Loading Door
7. Standby Key
8. Standby Light
9. Remote Eye
10. Display Window
11. Stop/Open
Switching On
The mains power to the CDXt should normally be left on unless left
unattended for a long period when the mains power at the wall socket should
be switched off or the product disconnected from the AC supply.
When power is applied, the STANDBY key
h
Standby light
shows red when the CDXt is in Standby and green when
operational.
Loading a Disc
Press the STOP/OPEN key
with the label side upward. Press the STOP/OPEN key
will load into the player. The CDXt display will show 'Reading' while checking
the contents of the disc.
Playing a Disc
Press the PLAY/PAUSE key
from track 1 unless otherwise selected.
Pausing
Press the PLAY/PAUSE key
held at the precise point of interruption and the PAUSE symbol will show on
a
or
the display. Press the PLAY/PAUSE key
Fast Forward/Reverse
The SEARCH FORWARD
to locate a specific point within a track. The search will commence initially at a
slow speed increasing after a few seconds if the key is held down.
The Search keys will also search through next or previous tracks if held down
long enough.
Previous/Next Track Selection
1%
Pressing the NEXT
backward through the tracks on the CD. Track indications appear on the
display.
Repeat
1@
The REPEAT key
tracks.
When REPEAT is selected, its symbol shows on the display. Press the key a
second time to clear Repeat.
If a program selection has been stored, the REPEAT key
continuous play of this program sequence.
Stop/Open Key
When a disc is playing, press the STOP/OPEN Key
immediately.
If the disc is already stationary, one touch of the STOP/OPEN key
open the tray.
User Instructions
12.
Repeat
13.
Search Forward
14.
Search Reverse
15.
Next Track
16.
Previous Track
17.
Play/Pause
g
is used for power control. The
1!
to open the CD tray. Place a CD in the tray
1&
on the front panel. Playback will commence
1&
to pause the current track. The disc will be
1&
again to resume playing the disc.
1#
and SEARCH REVERSE
1^
or PREVIOUS
keys allow you to change forward or
can be used to replay the entire disc or programmed
1!
again. The CD tray
1$
keys may be used
1@
will allow
1!
to stop the disc
1!
will
GB
GB