Cyrus DVD8 사용자 지침 - 페이지 9
{카테고리_이름} Cyrus DVD8에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Cyrus DVD8 13 페이지.
페이지 인쇄Cyrus DVD8
Playing a Video CD
You will recognize Video CDs by the logo. Depending on the material on the
disc (a movie, video clips, a drama series, etc.) it may have one or more
tracks, and each track may have one or more indexes, as indicated on the
disc case. To make access easy and convenient, your player lets you move
between tracks, and between indexes.
Some Video CDs have Playback Control (PBC), which is a pre-defined
playback sequence stored on the disc.
Playing a disc
When a VCD is loaded the DVD8 will automatically begin to play. If disc play
has stopped, press
to start play of the disc.
You can resume play from the point at which you stopped. Press
when you see the resume symbol on the screen. The resume feature applies,
not only to the disc in the player, but also to the last four discs you have
played. Simply re-insert the disc, and when you see the Resume icon on the
screen, press
again.
Moving to another track or index
When a disc has more than one track or index you can move to another
track/index as follows:
Press
or
briefly during play to step through the sequence.
To change between track/index selection, press the T-C key and select as
required from the OSD menu bar.
To go directly to any track, press T-C, then enter the track number using a
Numerical key.
NOTE:- If the number has more than one digit, press the keys in rapid
succession.
Playback control (PBC)
Insert a Video CD with PBC and press
TV screen.
Go though the menu with the keys indicated on the TV screen until your
chosen passage starts to play. If a PBC menu consists of a list of titles, you
can select a title directly.
Enter your choice with the Navigation keys or Numerical keys.
Press
to start the play of the selected title.
Press RETURN to go back to the previous menu.
Access control
If you activate Access Control, only discs that you have already authorised as
suitable for all ages can be played as above. To play any other DVD-Video
disc, the OSD will ask you to enter your Access Control PIN code. When this
has been done, play starts automatically. To activate Access Control, and to
authorize discs, see Activating Access Control.
Still picture and step frame
To get a still picture, press
during play. To step forward to the next picture
frame, press
again. To return to play, press
Search
To search forwards or backwards through the disc at 4x normal speed, press
and hold
or
for about 1 second during play. Search begins, and sound
is muted. To step up to 32x normal speed, hold
screen icon changes. To return to 4x normal speed, press
Search speed and direction are indicated on the screen for 2 seconds each
time
or
is pressed.
To end the search, press
Slow motion
Slow motion is controlled through the OSD menu system. Select OSD on the
remote control to enable the menu, then refer to the 'DVD8 menu symbols' to
identify the Slow Motion symbol.
Repeat track/disc
To repeat the currently playing track, press the
symbol will appear on the player display and the Repeat Track icon will be
displayed on the TV screen..
To repeat the entire disc, press
now be shown on the TV screen.
To exit Repeat mode, press
7
. The PBC menu will appear on the
.
or
again until the
or
as desired.
key once. The
a second time. The Repeat Disc icon will
again. The repeat symbols will switch off.
FTS programming for DVD or VCD
The FTS option is an advanced system for track programming of a DVD or
audio CD. When using FTS the DVD8 will memorise your selection of
favourite tracks and recall these each time the disc is loaded to play. If FTS is
switched on, the DVD8 will automatically play this track sequence when an
FTS programmed disc is loaded.
NOTE:- FTS is selected and Favourite Track Selections are compiled and
played using the menu on the TV monitor: ensure that the TV is on.
Switching FTS on/off
1.
FTS is switched on/off from the main FTS menu of the OSD.
Storing a program
again
1.
Load a DVD or Video CD and stop playback.
2.
Select 'Video FTS' from the menu bar (see DVD8 menu symbols).
Storing complete DVD titles
3.
Use the
display.
4.
If you want to store a complete title, use
Keypad to select the title you wish to program from the list.
5.
Store the title by pressing OK.
6.
When title storing is complete, press
Storing DVD chapters
3.
Press
on the selected title.
4.
Use
or
number.
5.
Store the chapter by pressing OK.
6.
When title storing is complete, press
NOTE:- The FTS system has capacity for 20 program entries.
NOTE:- The stored program will be memorised and recalled when the DVD8
recognises this disc in the future.
Erasing a FTS-Video program entry
1.
Load a DVD or Video CD and stop playback.
2.
Select 'Video FTS' from the menu bar.
3.
Use
to go to the 'program' list of selected titles/chapters.
4.
Use
and
5.
Press OK to erase the track.
Erasing a complete FTS-Video program
1.
Select 'Video FTS' from the menu bar.
2.
Use
to select 'Clear All', then press OK. The complete FTS program
will be erased.
again.
User Instructions
key to go to the list of available titles on the TV monitor
to start playback.
or the a Numerical key to select the required Chapter
to start playback.
to select the entry to erase.
or
or the Numeric
GB
GB