Cyrusher KT-LCD3 사용자 설명서 - 페이지 8
{카테고리_이름} Cyrusher KT-LCD3에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cyrusher KT-LCD3 19 페이지.
Cyrusher KT-LCD3에 대해서도 마찬가지입니다: 컴퓨터 매뉴얼 (11 페이지)
페이지 인쇄
Cyrusher Sports Team
www.cyrusher.com
the rim data is flashing, press
or
to change the data of rim diameter.
10. Speed Unit Preference Setting
After setting wheel rim diameter, press
to switch speed unit changes setting. When
you see the MPH/ Km/H and Mil/Km are flashing, press
or
to change Speed
Unit you prefer.
Please note above setting from 8 to 10, need to press
one time or hold on for 2
seconds to turn off after each setting to save changed data. If no movement on setting
button over 1 minute, the bike computer will go to the default working screen and all
your changed setting data will not be saved.
P Level Setting Code
Operation
：
After Speed Unit Preference Setting, press
+
together for 2 seconds to enter
the P Level Code setting model.
P 1: Motor Feature Setting
Range：1-255. XF800 default code is 87;
press
or
to change data required.
When you see P1 is flashing,
8 / 18