Cyrusher LCD-S700 컴퓨터 매뉴얼 - 페이지 16
{카테고리_이름} Cyrusher LCD-S700에 대한 컴퓨터 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cyrusher LCD-S700 16 페이지. For bike models xf650/xf690/xf770
Cyrusher LCD-S700에 대해서도 마찬가지입니다: 컴퓨터 매뉴얼 (16 페이지)
페이지 인쇄
System Parameter Settings
Error code definition
S700 can provide warning for the vehicle fault, in the LCD shows the ERROR icon when
a failure is detected, the position ERROR code displayed ERROR code n, n = 0 ~ 11
shows ERROR, ERROR code comparison table 1 table as shown below
Status code
（decimalism）
0
6
7
8
9
10
11
Maters needing attention
In use, the time interval between starting and shutdown should not be less than 3
seconds, and do not press the MODE key when it is turned off
Pay attention to safe driving in use and avoid instrument crashing. Try not to use it
in harsh conditions, such as heavy rain, heavy snow, and exposure. Try to avoid the use
of battery under voltage and avoid damage to electric car batteries.
When the temperature is under 10℃, the screen will turn dark with the reduce of the
temperature.
Frequently questions and answers
question:why it can not be started?
Answer: checking whether the wire harness of the instrument is in good contact
with the controller.
question: How should the fault code be handled?
Answer: coming to the ebike agent for maintenance
CYRUSHER.COM
State
Normal
Battery under voltage
Motor fault
Handle fault
Controller fault
Reception fault
Communication fault
Battery charge
Check whether the power line is loose
Check the links, if it is normal, then
replace the handle
Check the links
Check the links of the instrument cable
Check the links of the instrument cable
Page 15
Process mode