ASIT AHD-4V1D-T/RF-720P 빠른 시작 매뉴얼 - 페이지 4
{카테고리_이름} ASIT AHD-4V1D-T/RF-720P에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ASIT AHD-4V1D-T/RF-720P 6 페이지. Analog hd video over fiber converters for smart hd cctv
페이지 인쇄Network Equipment สำ หรั บ กล้ อ งวงจรปิ ด
Shenzhen HUAHANDA Optical Technology Limited
The video transmission systems series are preset for use with the data protocol RS-485. Simply connect
the signal, power supply and fiber optic cables between the two units. There are indicator LEDs on the units
for monitoring the real-time status of power and data. The following instructions describe the typical
installation procedure and the function of the LED indicators located on each unit.
1. connect the video source (camera) to the video input BNC connector on the transmitter unit using coaxial
cable.
2. Connect the video output BNC connector on receiver unit to the video monitor using coaxial cable.
3. Connect the fiber optic cable between the transmitter and receiver.
4. Apply the power supply to both the transmitter and receiver.
5. when the power is applied, the yellow POWER LED will light, indicating the presence of operating power.
The blue VIDEO LED and the blue DATA LED will give an indication as stated in the following page.
6. The system should now be operational.
www.asd.co.th
ตั ว แปลง FO-AHD