ASIX AX88772 설치 매뉴얼 - 페이지 3

{카테고리_이름} ASIX AX88772에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ASIX AX88772 19 페이지. Usb 2.0 10/100m fast ethernet adapter
ASIX AX88772에 대해서도 마찬가지입니다: 사용자 설명서 (14 페이지), 사용자 설명서 (4 페이지)

페이지 인쇄

v1.0.0.8

Francis

v1.0.0.7

Francis

v1.0.0.6

Francis

v1.0.0.5

Francis

v1.0.0.4

Allan Chou

v1.0.0.3

Allan Chou

v1.0.0.2

Allan Chou

v1.0.0.1

Allan Chou

v1.0.0.0

Allan Chou

WinCE 5.0 Driver Installation Guide

2009/01/06

1. Fix SROM size error when program EEPROM.

2008/11/14

1. Change interrupt in interval from 1s to 125ms.

2 .Register VID/PID 0B95_7720 and 0B95_772A instead

of only VID 0B95 in USBInstallDriver routine.

3. Modify EEPROM write function, add a write delay

time parameter, and add

OID_SET_EEPROM_DELAY_TIME to let SROM

tool to set this parameter. Default value is 5ms.

4. Turn on AX88772A backpressure function when

enable flow control.

2007/04/02

1. Support AX88772A chip. (Add wakeup frame and

VLAN)

2. Modify to fix EHCI resume issue.

3. Change "Prefix" parameter from "NDS" to "ASX" in

"project.reg" file

1. Add the "OID_ACCESS_EEPROM" OID to support

2006/10/02

SROM Programming Tool.

2006/05/18

1. Modify to fix the CETK test failure issue when the

"NetworkAddress" parameter was set.

2006/01/23

1. Modify to fix RX hang-up issue under AU1200

platform for a long-time media stream test.

2005/11/10

1. Modify to fix TX hang-up issue under MainStone II

platform.

2005/09/14

1. Modify to support external MII PHY.

2005/07/14

1. New release for WinCE 5.0.

AX88772A/AX88772