Ask C90 제품 설명서 - 페이지 4
{카테고리_이름} Ask C90에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ask C90 11 페이지. Projector control
페이지 인쇄
2 GENERAL
This document describes the Communication Protocol between a Proxima® Projector and a Computer (Host).
By using this connection the Host will be able control the projector.
This document are HEX command based only and a regular Terminal program like hyperterminal etc. can
therefore not directly be used unless the COM port are activated by the user. This document is aimed at
control systems in general which is HEX based.
3 FUNCTION TYPE
The Function is grouped in four different function types:
Function type
Execute
State
State String
Adjust
Table 4
4 PROTOCOL MESSAGES
4.1 Message Formats
The message is always divided in a header and a body part:
Message Head (7Byte)
4.1.1 Message Head
The message head has the following structure:
Byte 0
Byte 1
Magic Number
0xBE
0xEF
Table 5
All values is in hexadecimal indicated with the leading 0x. The Magic number is used for synchronizing the start of a
message. The Body size is set to the number of bytes contained in the Body part of the message.
Currently there is only one type of body so the size is fixed to 0x0006. The CRC field contains the CRC of the message.
The CRC algoritm is given in Appendix 1. To disable CRC set CRC_lo=0x00 and CRC_hi = 0x00.
The Message Head – if the CRC are disabled – then looks like the following string:
0xBE 0xEF 0x80 0x06 0x00 0x00 0x00. This Head will be present in all strings sent to the projector from the host.
Page 4
Projector Control
Message Body (6Byte)
Byte 2
Byte 3
Body size
0x80
0x06
Comments
An execute function executes an action on the projector, i.e.
only one state.
An State function performs a set operation from a predefined
list of states. Not all values in the range
have to be legal.
As state but returns ASCII strings
An adjust function is characterized by Maximum >
Minimum. And all the integer values between Minimum and
Maximum are legal.
Byte 4
Byte 5
Byte 6
CRC
0x00
CRC_lo
CRC_hi
Version 1.0