Cytron RFID-IDR-232N 사용자 설명서 - 페이지 11
{카테고리_이름} Cytron RFID-IDR-232N에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cytron RFID-IDR-232N 12 페이지. Rfid reader
페이지 인쇄6. RFID-IDR-232N Protocol
High level language which can access to serial port can be used to develop program for
RFID-IDR-232N on desktop PC or laptop. Some examples of high level language are Visual
Basic, Labview and Visual C++.
If RFID-IDR-232N is connected to microcontroller, Assembly language or C
compiler (depending on microcontroller type) can be used to write program.
RFID-IDR-232N will read the ID from RFID tag if the tag is near enough to RFID Reader. The
ID is normally 10 digit of number. RFID-IDR-232N will automatically send this ID with 1 byte
of Start of heading (0x01), followed by 10 byte of ASCII character (ID) and 1 byte of Start of
text (0x02).
1 byte
Start of Heading
st
The 1
byte will be read is "Start of heading" followed with 10 bytes of RFID Identification
number. The last 1 byte is "Start of Text"
Created by Cytron Technologies Sdn. Bhd. – All Right Reserved
Product User's Manual – RFID-IDR-232N
10 byte
RFID Identification
ROBOT . HEAD to TOE
1 byte
Start of Text
10