Ega Master 57665 사용 설명서 - 페이지 8

{카테고리_이름} Ega Master 57665에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ega Master 57665 18 페이지. Máquina de calibración de par

This machine is designed to be installed in office-type facilities, well lit, on a table, powered

by a conventional 16A Schuko socket for domestic or office installations protected by a <16A

circuit breaker and 30mA differential.

Order and Cleanliness

he machine must have its own minimum accessory elements. Use a cotton cloth to clean it

and in case of dirt, slightly moistened with soapy water.

Identification plate present and legible

Model, CE Marking and Manufacturer.

Wear

There should be no strange noises .

The crank should turn between stops smoothly and without squeaks.

Corrosion

There can be no corrosion. It is a machine for office use in a dry environment.

If in doubt, contact the manufacturer for review and maintenance.

- DO NOT use this machine for tests that do not correspond to its intended use.

- DO NOT use the machine if you doubt its condition.

- DO NOT overload the machine or the sensors. Take into account the ranges of the sensors.

DESCRIPTION OF INTENDED USE

THE FOLLOWING POINTS MUST BE VERIFIED

REASONABLY FORESEEABLE MISUSE