Ega Master 60148 사용 설명서 - 페이지 4

{카테고리_이름} Ega Master 60148에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ega Master 60148 14 페이지.

ENGLISH

Attention! Be careful.

1. Do not wear loose clothing. They could be caught by moving parts of the machine.

2. For outdoor work, rubber gloves must be worn.

3. Before starting up the machine, check that the electric cable and switch are in optimum

condition.

4. Before carrying out any maintenance work or change of accesories, disconnect the machine

from the mains.

5. Always use the machine´s indicicated accesories because if you don´t, it could lead to risk of

personal injury.

Always carry out any job on the machine with the machine disconnected.

1. Pipe Fastener Support: Check that the teeth of the jaws are in optimum condition; if not, replace

them.

2. Gear Box: Maintenance is not required because it has special grease which is good for life.

3. Brushes: Clean them and check the condition of the slack, changing the brushes when the slack

reaches 2/3 of the total.

4. On switch: Check that the machine switch unblocks automatically when finger pressure is

released, stopping the motor rotation.

Note: For any necessary repairs, contact with our Technical Services.

Threading capacity

Motor

Thread speed

Reverse speed

Weight

1. Use maker's threading heads, light series and heavy series.

2. Always use the support; fastening it correctly to avoid the machine from rotating around the pipe

(especially when threading the biggest sizes).

SAFETY INSTRUCTIONS

MAINTENANCE

TECHNICAL CHARACTERISTICS

1/4 ÷ 2

1350 W (230 V / 50-60 Hz) or (110 V / 50-60 Hz)

28 rpm

50 rpm

8 Kgs.

WORKING INSTRUCTIONS