EGAmaster 79991 사용 설명서 - 페이지 9

{카테고리_이름} EGAmaster 79991에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. EGAmaster 79991 18 페이지. Torque wrenches

Proper use of this prefessional torque wrench will give you complete satisfaction in its

permormance and reliability. Following are some helpful tips:

a) Don't use your weight when using torque wrench, also don't pull and push wrench fiercely.

b) Never set for higher or lower torque values than those indicated on your wrech.

c) Do use the torque wrench within effective-length marking range of handle.

d) Make sure enough operation space when using the torque wrench.

e) Never use the torque wrench as a hammer or mallet.

f ) Periodically check the wrench by qualified person, make sure the insulating performance

accuracy and normal use of wrech.

g) The loading direction must be at a right angle to the torque wrench, the tolerance is ±15º of

horizontal or vertical deviation.

h) Before using or storing the wrench, or whenever necessary. Remove all debris, oil, water,

etc. keeping the wrench clean will extend its life.

i ) Select the minimum torque of the key for storage.

Until one year from the date of purchase, we will repair any defect in material or

workmanship free of charge. Improper use of these products, including but not limited to the

application of ecessive force, will affect performance and may result in injury. The warranty

does not apply to wrenches which do not function properly or within specified accuracy because

of wear, improper or unreasonable use, damage not resulting from defect or malfunction, or

wrenches which have been altered.

LIMITED WARRANTY