Asko D1976CSTM 설치 지침 매뉴얼 - 페이지 3
{카테고리_이름} Asko D1976CSTM에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Asko D1976CSTM 14 페이지. Standard dishwashers
Asko D1976CSTM에 대해서도 마찬가지입니다: 사용 및 관리 매뉴얼 (12 페이지), 빠른 시작 매뉴얼 (2 페이지), 설치 및 사용자 지정 (4 페이지), 사용 및 관리 매뉴얼 (12 페이지)
페이지 인쇄
DIMENSIONS
UNIT DIMENSIONS
US
Measurements
Height
32-1/4"–34-1/4"
Width
*24"
Depth
23-7/16"
Weight
104 lb
*
Model D1976CSTM is 23-5/8" (600 mm) wide. See
page 11 for details.
PREPARING THE LOCATION
The best place for your dishwasher is in the kitchen
near the sink. This makes it easier to connect the water
and drain supply lines.
A built-in dishwasher must be enclosed on the top,
both sides and the back.
The electrical and water supplies should enter through
the area indicated by the shading on the illustration at
right. They should come through the right side of the
machine, a maximum of 2" (50 mm) from the back wall
and 6-1/4" to 8-1/4" (159 to 210 mm) from the floor,
depending on the underneath cabinet height.
Access holes must be round and smooth, and they
should be 1-1/2" to 2" (38 to 50 mm) in diameter.
EUROPEAN INSTALLATIONS
The kick plate supplied with your dishwasher fits a 24"
(610 mm) opening. When using European standard
installation, a 23-1/2" (597 mm) wide toe kick is available
from your ASKO dealer. (Part numbers: White=8057528-
0; Black=8057528-29.
For a 6" toe kick installation, you will need an extension
toe kick piece. (Part numbers: White=8070121-0;
Black=8070121-29)
Metric
Measurements
819–870 mm
610 mm
596 mm
48 kg
CABINET OPENING
US
Measurements
Height
32-1/4"–34-1/4"
Width*
24-1/8""
Depth
23-7/16"
The opening width for Model D1976CSTM is 23-3/4"
*
(603 mm) wide. See page 11 for details.
Metric
Measurements
819–870 mm
613 mm
596 mm
Page 3