Bluerock Tools MWS-808 서비스 매뉴얼 - 페이지 7
{카테고리_이름} Bluerock Tools MWS-808에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bluerock Tools MWS-808 10 페이지. Wire strippers
페이지 인쇄12. Alternate placing new blades and blade spacers on the shaft in the order they came off
starting with a blade.
13. Replace the spanner nut and tighten with the same method used to remove it.
14. Thoroughly clean the mating surfaces between the bearing housing, bearing, and blade
shaft. Lubricate each of these surfaces with a thin coat of grease.
15. Set the bearing housing on a flat piece of wood with the bearing aligned on top of it. Use
a rubber mallet to seat the bearing in the housing.
16. Carefully hold the blade shaft vertically on a piece of wood and align the bearing with the
end of the shaft. Use a rubber mallet to seat the bearing on the shaft.
Reassembly