Egardia Key pad 설치 매뉴얼 - 페이지 2

{카테고리_이름} Egardia Key pad에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Egardia Key pad 4 페이지.

Website Egardia

www.egardia.com

INSTALLATION GUIDE KEY PAD

Congratulations on the purchase of your Egardia key pad.

Customer Service

Please visit

www.egardia.com

Egardia. The answers to a number of frequently asked questions can be found at

www.egardia.com/userquestions.

This package has been put together with care. Please contact our customer service if you would like

any help during installation or if something is missing from the package. Never return a package

without prior instruction from our customer service.

Key pad

The key pad is an easy way to operate your Egardia alarm system from inside your home. Each

registered user is able to turn the alarm system on or off using his/her valid PIN code. Also, the key

pad allows you to partially activate your alarm system (ON, partially). This is particularly useful for

e.g. safeguarding the downstairs floor while you are sleeping upstairs.

When the button "HELP" is pressed a panic alarm will be triggered and all your registered contact

will instantly receive an alarm message.

In your Egardia account you can enter a PIN code for each authorized user. Via the tab "Alarm

history" you can always see which particular user has turned the alarm system on or off.

Please note! By both burglar alarms and panic alarms the gateway will emit a very constant and

loud audible signal. A panic alarm can only be deactivated by the key pad. Enter a valid PIN code

and press

to deactivate the panic alarm.

OVERVIEW KEY PAD

Indicator light Activity (green) – The green indicator light glows for a few seconds after

a button has been pressed.

Indicator light Transmit (red) – The red indicator light flashes a few times to indicate a

signal is being sent to the gateway.

Fault light (orange) – The orange indicator light flashes continuously when the batteries

need replacing.

Mounting holes – Situated under the 2 caps are the mounting holes.

Key pad keys:

Numerical keys (1 – 9, *, 0, #): To enter PIN codes.

: Enter [PIN code] followed by

: Press to immediately activate the panic alarm function.

if you would like further information about the installation and use of

to deactivate the alarm ("OFF").

to activate the alarm ("ON").

to partially activate the alarm ("ON, partially").