Ambery LCDT6 운영 매뉴얼 - 페이지 7

{카테고리_이름} Ambery LCDT6에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambery LCDT6 16 페이지. Super video to wxga converter external cable tv tuner

(2)

Set up cable connection when connecting with a PC. (In this section, you will

watch TV while using your PC at the same time after finishing all the installation.)

Connect the coaxial CATV cable from the wall into the RF input ("CABLE IN" port) in the

back panel of TV tuner module.

Connect the VGA cable from PC video card output to the VGA input ("VGA IN" port) of TV

tuner module.

Connect the VGA cable from the VGA output( "MONITOR" port) in the back panel of TV

tuner module to your VGA monitor or LCD TV monitor.

Run the 3.5mm audio cable from your multimedia speaker or stereo system to the audio

output ("SPEAKER" port) from the back panel of TV tuner module.

Connect the audio out from the PC sound card to the audio input ("AUDIO IN" port) in the

back panel of TV tuner module to your VGA monitor or LCD TV monitor.

Connect the AC/DC power adapter of the TV tuner module and power on the cable TV

tuner module using the supplied remote control or the push button on the tuner module.

Set the TV tuner module at TV mode by pressing the "INPUT" button from the remote

controller or from the front control panel on the module unit itself. The "INPUT" button will

lead you to the desired video input channel from Coax(TV), Composite Video,

S-Video and PC VGA Pass Through. The video channel selection goes by a loop, i.e.

CATV

If the TV video screen is displayed on the CRT/LCD TV monitor or projector when you set

the TV tuner module at TV mode. Congratulation! You have finished the installation.

*All brand names and trademarks stated or illustrated are related to their respect owners.

CATV...

Rear

Sound Card

VGA Card