Bluerock Tools CG-211Y 운영 매뉴얼 - 페이지 5

{카테고리_이름} Bluerock Tools CG-211Y에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bluerock Tools CG-211Y 16 페이지. Pipe torch/burner machine

C G - 2 1 1 Y

T O R C H

Ø DO shut off gas while changing cutting tips so as not to accidentally cause gas related

injuries.

Ø DO ensure all tightening points, brackets, wing-nuts, and lever-bolts are tight and stable prior

to turning the machine on and/or starting the gas flame.

Ø DO use a dust/fumes extraction system for cutting all materials. The operator should also

wear a protective respiratory device in accordance with welding safety standards.

Ø DO NOT make adjustments to machine while the machine is running.

Ø DO NOT remove or modify grounding plug. Only to be used on a properly grounded circuit.

Ø DO NOT leave the flame running when not in use.

Ø DO NOT hold the work piece by hand or using body. Always mechanically clamp or secure.

Ø DO NOT allow flame too close to the machine body. This can cause machine components to

fail.

Ø DO NOT allow flame to come in contact with power cords.

Ø DO NOT operate machine outside of machine specifications.

Ø DO NOT touch moving parts or cutting flame while the machine is running as death or

dismemberment could occur.

Ø DO NOT stand under machine while running. The machine can fall and cause damage or

harm to the user.

Ø DO NOT allow children or untrained personal to operate machine.

Ø DO NOT use this machine in the rain or a wet environment. If using outdoors, make sure the

adhering surface is clean and dry.

Ø DO NOT cut into steel that may contain a live electrical wire/circuit.

B U R N E R

M A C H I N E