Ambery W-AVS4 사용자 설명서 - 페이지 7

{카테고리_이름} Ambery W-AVS4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambery W-AVS4 9 페이지. 2.4ghz wireless audio/video kit universal ir remote control extension with 8 coded channels

페이지 인쇄

OPERATIONS



Power on both transmitter and receiver unit using the supplied power adapters

from the standard package.



Connect the wireless transmitter unit to the A/V source device by using the

supplied composite RCA cable and power them on thereafter.



Connect the wireless receiver unit to the TV display or video monitor by using

the supplied composite RCA cable and power them on thereafter. Make sure

TV is set for displaying the right video channel input.



Check and make sure that the ID code setting is the same on both the

transmitter and receiver unit.



Take the remote controller of the AV source device (ex. STB / DVD) to where

the receiver is located.



Try aiming your remote control toward the front panel of the receiver unit and

you should see the IR Remote Data LED on the front panel of the receiver unit

start to flash in red.



At any time if you need to change the channel frequency for transmission,

simply press the channel select button on the top of the receiver unit. There

are 4 channels of frequencies to be selected. [Note]: The receiver will not

function properly if you press the channel button for switching channel while

the IR Data LED is flashing.

W-AVS4

June, 2010