Egasky Saturn R24M Nano 사용자 설명서 - 페이지 4

{카테고리_이름} Egasky Saturn R24M Nano에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Egasky Saturn R24M Nano 8 페이지. 2.4g station

AP mode is connected to a monitoring center or broadband terminal end, namely the transmitting end,

Client mode is connected to the IP camera or other network devices, namely the receiving end.

Because the bridge is two-way transmission, in Point to Point program do not distinguish between the

transmitter and the receiver.

However, Point to multipoint program, still in strict accordance with the illustrated erecting equipment.

Since the CPE covers "AP mode" and "Client mode", the following steps are categorized for convenience

reading to describe how to set each mode after successful log-in.

b. AP mode

b-1、Choose "Wireless Coverage"，Set SSID, Channel, Authentication , Key ;Click "Apply"；

b-2、 Change CPE ip address, Select Advanced Settings, Network> Lan Settings> IP Setting; Select "Static IP",

Set new ip Click "Apply"；

- 4 -