페이지 인쇄MAX2 frequency response (MAX2 setup, floor coupling, standard)
MAX2 frequency response (linear setup, free field), standard and
CUT
8
2.5. Technical specifications
MAX2 system data
Frequency response (–5 dB standard)
Frequency response (–5 dB CUT mode)
Max. sound pressure (1 m, free field)
with D6/10D
with D80/D20/D12/30D
(SPLmax peak, pink noise test signal with crest factor of 4)
MAX2 loudspeaker
Nominal impedance
Power handling capacity (RMS/peak 10 ms)
Nominal dispersion angle (conical)
Components
Connections
Pin assignment
Weight
MAX2 cabinet dimensions in mm [inch]
55 Hz - 20 kHz
90 Hz - 20 kHz
131 dB
135 dB
8 ohms
250/1600 W
75°
15" LF driver with ferrite magnet
1.4" exit compression driver
Passive crossover network
NLT4 F/M
optional 2 x NL4 or EP5
NLT4 F/M and NL4: 1+/1–
EP5: 1: + / 2: –
23 kg (50 lb)
d&b MAX2 Manual 1.2 en