Bluescience UV-c 설치 지침 매뉴얼 - 페이지 7

{카테고리_이름} Bluescience UV-c에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bluescience UV-c 10 페이지. 700mm led kit uv air disinfection system

STEP 5

Route the cables from the LED Driver (Output)

through the AC unit making sure they are free

from any moving parts and will not obstruct

the casing being re-fitted. The cable should

be routed to sit at the top of the evaporator

coil close to the 'air in' side.

STEP 6

Connect the UV-c LED strip and add date of

installation to the tag. Note: it is important

for you or any other Engineers to be able to

identify the age of the UV-c LED!

STEP 7

Lay the UV-c LED Strip on the top of the evaporating coil, making sure the UV-c LED's are facing in

towards the unit. UV-c LED's must not radiate out or point out in the direction of the room.

STEP 8

If required, UV-c LED Strip can be cut to a desired

length. Cuts can only be made at the terminal point

seen after each UVC LED labelled 'LED 3', peel back

the adhesive strip and fix the UV-c LED strip into place.