Blueshape CVS2 운영자 매뉴얼 - 페이지 6
{카테고리_이름} Blueshape CVS2에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Blueshape CVS2 8 페이지. Energy inside. intelligent battery chargers for v-lock lithium ion batteries only
페이지 인쇄Operating Instructions - CVTR1
This charger charges one battery at a time with a charging current of up
to 4 Amperes.
•
Plug the 24V connector inside the charger module
•
Plug and switch on the AC mains supply
•
Switch on the AC mains supply
•
Insert the battery inside the V-plate
•
Observe the LED. In addition, the charge status may be read in 20%
steps through the BLUESHAPE battery LED array
(see table on page 5).
•
Leave the battery to charge (see table on page 4)
•
Unplug the battery when the LED becomes steady green
Operating Instructions - CVTR2
This charger charges two batteries sequentially with charging currents
of up to 4 Amperes.
•
Plug the AC power cord provided into the charger AC input
•
Plug and switch on the AC mains supply
•
Insert a battery inside any one of the two V-plate adapters
•
Observe the LED. In addition, the charge status may be read
in 20% steps through the BLUESHAPE battery LED array
(see table on page 5).
•
Leave the battery to charge for the appropriate time (see table on
page 4)
•
Unplug the battery when the LED becomes steady green
In the case when you want to charge 2 batteries:
Insert the second battery into the second V-plate adapter
This second battery will start charging when battery #1 has finished
charging.
The LEDs will always display the correct status of the charging process
for each battery.
ADDITIONAL SAFETY NOTES
6
Be careful not to block the equipment's ventilation outlets
Never insert any metallic or any other objects inside the equipment
through the ventilation openings or otherwise.
Chargers and/or batteries may become hot during
charging. This is normal. Please consult your BLUE-
SHAPE dealer if you notice that either a charger or a
battery become excessively hot during the charging
operation