Blueshape PWS4-48 사용 설명서 - 페이지 7

{카테고리_이름} Blueshape PWS4-48에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Blueshape PWS4-48 12 페이지. Power station

Interpretation of the Display

Upon switch on (at least one battery on any channel must be

present), the display lights showing the installed Firmware versions.

From then onwards, the screen will interchange between 2 different

data displays. The interval between screen interchanges is

approximately 3 seconds.

The first screen will display as follows:

Column #1

Battery no. (1 through 4)

Battery remaining capacity in percentage

Column #2

(100%=full, 0%=empty)

8 bar current contribution meter

Column #3

The bars represent the PERCENTAGE contribution

of the channel versus a maximum possible of 10A

for that channel

Power outputs for 48V and 14V supplies

Column #4

simultaneously

The state of charge of each installed battery is shown in

percentage.

When BLUESHAPE BV batteries are powering the unit, this value is

very accurate and is read and updated in real time through the

dialogue between the battery and the unit since they are using the

same protocol. It therefore represents a true value of the remaining

capacity.

When 3rd party batteries are in use, the capacity value may not be

as accurate since this is an estimation that unit makes based on the

battery voltage