Ambia ACH-120 소유자 매뉴얼 - 페이지 4

{카테고리_이름} Ambia ACH-120에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ambia ACH-120 7 페이지.

OPERATING INSTRUCTIONS

SITUATING YOUR TWO ZONE HEATER

Your heater has been designed with a variety of use situations in mind. The

two basic uses are:

1. Combined: both heat modules attached to base, used as a single heat

source

2. Separated: each heater module in a different position, connected by the

interconnect tether

COMBINED

Place the heater where desired, taking careful note of the safety guidelines

listed in Section 3 of this manual. Please see the Controlling Your Heater

section for further instructions.

SEPARATED

A unique aspect of your Two Zone Heater is the ability to locate the two

heater modules in separate locations.

To separate the modules:

Lift module, pull away from base.

To make routing the

interconnect cord easier,

it can be disconnected

from the base unit, and

reconnected after you've

located the module

where you want it.

Use the power knob to turn

the heater on, and select

which modules you wish to

provide heat.

• Position 1 powers both

units.

• Position 2 powers only the

right module, and

• Position 3 powers only the

left module,

NOTE: When re-attaching the

module to the base, you may

choose from 3 angles.

OFF