Blueshape BG100HD 사용자 설명서 - 페이지 4

{카테고리_이름} Blueshape BG100HD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Blueshape BG100HD 16 페이지. Professional broadcast 3-stud camera batteries

GRANITE TWO battery series:

Presentation

This drawing is for reference only. The size of the real battery may vary depending on model.

Please see the next table for precise dimensions.

5-LED gauge (4x blue+1x RGB) and push button for capacity

check and Wi-Fi activation. The RGB LED indicates the Wi-Fi

activity status.

Contact block

D-TAP sockets 14.8V(nominal)/5A with overload protection*

D-TAP sockets 14.8V(nominal) without overload protection*

be used as alternative charging socket

3-Stud mounting system

The output from this D-TAP socket should not exceed 70W. Above this

value, the D-TAP protection circuit intervenes, disconnecting the output

but without effecting the battery operation through the main terminals. The

power is automatically resumed by removing the overload condition from

the D-TAP. The total output power from the battery terminals and D-TAPs

should never exceed the nominal power of the model in use. Above this

value, the battery may go into main protection but will again resume

operation a few seconds after the overload condition has been removed.

This D-TAP socket is not independently overload protected meaning

that an excessive current or a short circuit will trip temporarily the battery

- 4 -

can