Blueshape MVQUICK 사용 설명서 - 페이지 3

{카테고리_이름} Blueshape MVQUICK에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Blueshape MVQUICK 8 페이지. Hot swap system for v-lock lithium ion batteries

Principle of operation

MVQUICK features an internal battery system of about 21Wh. This

power source is automatically connected to the output terminals

(becoming the only power source) whenever the main V-Lock

battery is not installed, removed or empty (voltage below 12V).

Alternatively, when a V-Lock battery with a voltage greater than 12V

is installed, it becomes the main power source connected to the

output connector.

If, during usage, the V-lock battery voltage drops below 12V, or it is

removed, MVQUICK automatically provides a continuous power

supply to the device without any power interruption.

As soon as this switchover takes place and MVQUICK operates

through its internal power source, the 3 LEDs become alighted

(depending on the state of charge) to alarm the user that the main

power source, coming from the external V-Lock battery is no more

available and the internal UPS is providing continuity power.

When operating as the main power source, the runtime provided by

MVQUICK depends by the state of charge of its internal battery and

the actual power consumption.

The LED array displays the state of charge based on the internal

battery voltage and the following criteria:

Voltage

> 15.2V

15.2V ~ 14.4V

14.4V ~ 13.0V

< 13.0V

Approx. state of charge

100% ~ 66%

66% ~ 33%

33% ~ 10%

0% ~ 10%

LEDs

All 3 LEDs on [H M L]

2 LEDs on [M L]

1 LED on [L]

1 LED flashing [L]