d&b audiotechnik xC 24C-E 매뉴얼 - 페이지 14

{카테고리_이름} d&b audiotechnik xC 24C-E에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. d&b audiotechnik xC 24C-E 16 페이지.

2. Pull out the two connecting rails half their lengths.

3. Retighten the four remaining fixing screws on the extender.

3. Joining the cabinets

1. While a second person renders assistance, insert the

connecting rails of the 24C-E cabinet into the T-slot profiles at

the rear of the 24C cabinet approx. 10 - 20 mm.

2. Reconnect the input connector [I].

3. Push the Mate-N-Lok plug [E] of the extender into the

respective connecting socket, as shown in the graphic

opposite.

4. Fully insert the connecting rails into the T-slot profiles.

Þ Ensure that no connecting wire is crushed between the

edges of the cabinets.

Ensure that the connecting panel of the extender is fully

inserted.

The connecting panel is fully inserted when the front grill of

the 24C cabinet is properly fitted into the panel and the

threaded inserts [T] are in line with the countersunk drills of

the 24C cabinet.

5. Refit and tighten the two countersunk screws (torx #T20).

6. Tighten the remaining four fixing screws (set screw - torx #T15)

of the connecting rails on the 24C cabinet.

d&b 24C / 24C-E Manual 1.1 en