Blueshape BMBPU90 사용자 설명서 - 페이지 9

{카테고리_이름} Blueshape BMBPU90에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Blueshape BMBPU90 11 페이지. Dv power packs li-ion batteries for camcorders, on-camera lights and accessories

페이지 인쇄

2. Set-up and Operation

1. Attach desired plates to the slots ensuring correct mating and locking of plate in its slot.

You may use any two different charging plate models at the same time.

2. Attach USB Type-C power adapter to the rear port.

3. Attach battery which matches with the installed charger battery plate.

4. (Optional) Touch the Turbo soft touch button to activate turbo charge mode. Turbo charge

will increase charge current and reduce charging time. Before using Turbo charge mode on

your battery, read the individual battery instructions in this manual.

5. Observe LED charge indicator to identify the battery pack charging status. A blinking

amber LED indicates that the battery pack is charging. When turbo mode is activated, the

LED will change to blue and blink at a faster rate. When the battery pack has finished

charging, the LED charge indicator will light as solid green. A solid red LED indicates that

the charger is in an error state.

6. Remove battery pack from the charger when not in use.