d&b audiotechnik Z Series 리깅 매뉴얼 - 페이지 8

{카테고리_이름} d&b audiotechnik Z Series에 대한 리깅 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. d&b audiotechnik Z Series 18 페이지. Al flying adapter
d&b audiotechnik Z Series에 대해서도 마찬가지입니다: 설치 지침 (14 페이지), 설치 지침 (8 페이지), 설치 지침 (7 페이지), 설치 지침 (11 페이지), 설치 지침 (12 페이지), 설치 지침 (10 페이지)

페이지 인쇄

2.4 Cabinet rigging mechanism

The cabinets are mechanically connected to the Flying frame and

subsequent loudspeakers using the Front links on both sides of the

cabinet front and the central Splay link on the rear rigging strand

of the cabinet.

All necessary rigging components are mounted to the cabinet and

slide out or fold out when needed.

2.4.1 Front link mechanism

To extend and/or park the Front link, proceed as follows:

1. Slide out the Front link [1] up to its stop position.

↳ Once the Front link is fully extended, it will be automatically

fixed in place by the spring steel sheet [2].

2. To slide the Front link back into its park position, press the

spring steel sheet towards the front grill.

3. Slide the Front link back into its park position.

2.4.2 Splay link mechanism

The Splay link is fixed in its park position ( ) by a Locking pin.

1. Release the Locking pin and fold out the Splay link.

2. To park the Splay link, proceed in reverse order and ensure

the extension tube is fully pushed in and the head is aligned

correspondingly, as shown in the graphic opposite.

A-Series rigging components

d&b Z5456 Rigging manual 1.1 en