Bluesim AVRCP 사용 설명서 - 페이지 4

{카테고리_이름} Bluesim AVRCP에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Bluesim AVRCP 13 페이지.

After putting the BlueSIM Bluetooth Desktop Phone into pairing mode, the user should complete the

pairing process at the mobile phone side (please refer to mobile phone maker for details). The searched

name of the BlueSIM Bluetooth Desktop Phone is in the format of "EB‐180 xxxxx".

You can also enter this mode by holding down the key for 5 sec until the display changes. The phone

will enter this mode as default when initially powered up.

The BlueSIM will exit this mode after approximately 3 minutes if no user interaction is detected.

The Default PIN/Passcode is 0000

Note: After successful pairing, "Housekeeping" will be seen and the BlueSIM Bluetooth Desktop

Phone will revert to idle state. When working with some mobile phone models, this message

may not be seen after the pairing is successfully completed. Should this happen, simply press

[Menu] to leave the pairing mode.

Auto Connect

Use [OK] to enter and use jog wheel to select ON or OFF. Press [OK] to confirm. When this feature is

turned on, the following display can be seen:

Auto connect XX

Delete to cancel

With the feature on, the BlueSIM Bluetooth Desktop Phone try to re‐connect to the most recently

connected device if the connection is broken (either the mobile device has been moved out of range

from the BlueSIM Bluetooth Desktop Phone, or the Bluetooth function has been shut off at the mobile

device). The attempt will be made every half a minute during idle condition, until either a successful re‐

connection is made, or the user presses [Delete] to cancel the feature at any time.

XX represents the countdown timer value for the auto connection to initiate.

Press [OK] to start entering the time/date in the "YY/MM/DD/HH/MM" format. For example,

"10/01/25/14/18" stands for 2:18pm 25th January 2010.

Users should adjust the time if the BlueSIM experiences a power outage. Users with a battery installed

will keep time during power outages.

This displays the phones technical details; you will need to provide this when requesting technical

support.

In a environment with 2 or more BlueSIM phones operating in close proximity, you can use this screen

to identify the Bluetooth Name. The bottom line identifies your particular device in the wireless

environment.

BlueSIM unique ID ===>

Page 3

v1.6b B0518 17F3

AXXXX V06 36234

Bluesim User's Guide eng v1.6b.rtf