D&D Technologies Codelocks CL5520 시작하기 매뉴얼

{카테고리_이름} D&D Technologies Codelocks CL5520에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. D&D Technologies Codelocks CL5520 7 페이지.

Codelocks Support

CL4500 - Getting Started Guide

Notice: The C3 Smart App replaced the K3 Connect App on February 14, 2023. For more information on

how to download, set up and use C3 Smart with your Codelocks Smart Locks,

visit: c3smart.net or contact Codelocks Support.

About Codelocks Smart Locks

The CL4500 and CL5500 locks can be operated and managed directly via the keypad or via a compatible

smartphone by downloading the C3 Smart App. This Getting Started Guide contains the common functions to

enable you to quickly program your lock.

For detailed instructions, refer to the Programming + Operating Instructions online

at: codelockssupport.com/smartlocks

The Basics

Master Code

The factory set Master Code is #12345678. This should be changed immediately after installation (Program 01).

The Master Code (and Sub-Master Code if set) always start with the # button. This puts the lock into

Programming Mode.

Programming

Each programming sequence starts with the #Master Code or #Sub-Master Code. The singular

throughout the sequence represent an acceptance flash; the keypad will illuminate blue to confirm a correct input.

At the end of a sequence, the keypad will flash twice

successful.

Access Methods

The lock supports a maximum of 350 Clients (users): User Codes (100), User Cards (150) and User Compatible

Phones (100).

https://codelocks.zohodesk.eu/portal/en/kb/articles/cl4500-getting-started-guide-16-1-2023

• •

confirming it's complete and programming has been

•

blue dots